7
English
Tip-over switch
• The fan heater is fitted with a tip-over switch (8) safety cut-off protection device
which switches the fan heater off if it falls over or is not vertical.
• The fan heater will start working again once it has been returned to the upright
position on a level surface.
Care and maintenance
• Switch the heater off, unplug it from the power outlet socket and let it cool.
• Clean the fan heater using a damp cloth. Clean the air inlet (6) and the air outlet (4)
with a soft brush or vacuum cleaner.
• Store the fan heater in a dry location when not in use.
Troubleshooting guide
The fan heater
does not start.
• Make sure that the fan heater is standing upright and that it is
placed on a level surface, otherwise the tip-over switch might
have been triggered.
• Is the power switch set to
I
?
• Has the thermostat turned off the fan heater?
Turn the thermostat knob clockwise
• Is the mains lead intact and properly plugged into the wall socket?
• Is the wall socket live?
• The overheating protection has tripped. Reset as instructed in
the
Overheating protection
section.
The fan heater
starts but stops
after a short time.
• The thermostat is set to a lower temperature than the current
room temperature. Check the thermostat setting.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner.
When recycling the product, take it to your local collection facility or
contact the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
Specifications
Rated voltage
220–240 V AC, 50 Hz
Power
750 and 1500 W
Mains lead
1.4 m
Size
29 × 21 × 14 cm
