Clarke X-Pro CAT202, Инструкция по эксплуатации и обслуживанию

Страница: 8 / 32

8
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
5. ALWAYS ensure that the socket is correctly installed before switching on.
6. ALWAYS wear suitable respiratory protection due to the possible presence
of asbestos dust from vehicle brake linings.
7. ALWAYS disconnect from the air supply when changing sockets or when
the wrench is not required for immediate use to avoid accidental starting
8. DO NOT carry the wrench by the air supply hose.
9. ALWAYS use both hands to control the wrench.
10. ALWAYS ensure the wrench has stopped before putting it down.
AIR HAMMER SPECIFIC HAZARDS
1. Only use accessories designed for use with this tool.
2. DO NOT use any of the chisels supplied as a hand struck tool.
3. DO NOT use blunt chisels which require excessive pressure and can break
from fatigue. Always use sharp tools.
4. DO NOT mis-use the tool by prising which can result in a broken chisel.
5. ALWAYS ensure there are no hidden electrical cables, gas pipes etc, which
could cause a hazard if damaged by action of the chisels.
BLOW GUN SPECIFIC HAZARDS
1. DO NOT use the blow gun if it is defective or operating abnormally.
2. ALWAYS maintain the blow gun with care. Keep it clean for the best and
safest performance.
3. DO NOT discharge this blow gun at any persons or animals.
4. DO NOT insert into any part of yours or anyone elses body.
5. DO NOT point directly at a person’s skin or at a fire.
6. DO NOT carry the blow gun by the air hose or with your finger on the
trigger.