4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2.
Use personal protective equipment.
Always wear eye protection. Safety
equipment such as dust mask, non-skid safety shoes, hearing protection
and a workshop apron capable of stopping small abrasive or workpiece
fragments.
3.
Avoid accidental starting
. Ensure the switch is in the off position before
plugging in. Plugging in power tools that have the switch on invites
accidents.
4.
Remove any adjusting key or wrench before turning the power tool on
. A
wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
5.
Do not overreach.
Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations. Dress
properly. Do not wear loose clothing or jewellery.
6. Keep your hair, clothing and gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in moving parts. Keep the
work area clean and tidy.
7. Regularly clean the power tool’s air vents. The motor fan will draw dust
inside the housing and accumulation of material could cause electrical
hazards.
8.
Avoid operator fatigue.
Stop the power tool at regular intervals for a short
break to rest hands and arms.
9.
Maintain your tools.
Keep all handles and grips dry and clean.
ELECTRICAL SAFETY
1. Position the power cable so that it cannot be inadvertently pulled or
pinched, and where it does not cause a trip hazard.
2. This machine is designed for indoor environments and must not be used for
other purposes.
3. If the machine requires repair, always contact your Clarke dealer. Always
insist on original spare parts. Repairs carried out by unauthorized persons
may be dangerous and invalidate the guarantee.
4. This machine must only be used by adults. Children should not be allowed
to play with this appliance.
5. Do not use extension power cables.
6. Before cleaning or maintenance operations, always unplug the machine
from the power supply.
POWER TOOL USE AND CARE
1.
Do not force the machine.
Use the correct power tool for your application.
It will do a better and safer job at the rate for which it was designed.
Содержание WOODWORKER CWL325V
Страница 16: ......
