11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
REPLACING THE BELT
NOTE: Part numbers refer to the Parts Diagram & List on pages 14/15
.
1. Undo the three screws (28) and
remove the end cover (27).
2. Using the allen key supplied,
loosen the bolts (39) to enable the
motor to move and the drive belt
to go slack.
3. Dismount the drive belt from the
motor pulley (34) and then lift it off
the drive pulley (31) towards you.
Use the allen key to help you as
shown in Fig 4. The belt can now be removed from the headstock frame.
4. Replacement is a reversal of the removal procedure. Tension the belt by
hinging the motor downwards prior to tightening the bolts (39).
Please refer to TROUBLESHOOTING on page 12. If you are unable to rectify any
faults, please contact your local dealer or Clarke International Service
Department on 0208 988 7400 for assistance.
Содержание WOODWORKER CWL325V
Страница 16: ......
