Clarke Woodworker CMS254, Инструкция по эксплуатации и обслуживанию

Страница: 9 / 21

As its’ name implies, the machine is a Bevel/Mitre Saw, capable of straight
cross cutting, and cutting bevels and mitres, or a combination of the two.
FEATURES
The main arm, or Cutting
Head, carries the motor and
the tungsten carbide saw
blade. It is allowed to swivel
to produce mitre cuts and tilt
to the left to produce bevel
cuts.
The maximum sizes of wood
that may be cut in any of
these processes is given on
page 17.
A dust extraction port is
provided at the rear of the
machine to which the dust
bag (provided), is attached.
If required, a vacuum
extraction device may be
used which will provide fast
and efficient removal of
sawdust. The extraction device may be used continuously or intermittently
depending upon your requirements.
The Cutting Head is locked in
its lower position for transit
purposes. To release it, pull
out the Head Locking Pin,
(see also G, fig. 16, p16). It
may be necessary to apply
slight downward pressure to
the head in order to do so,
and allow the head to rise to
its upper position gently,
under control.
The head will lock in its upper
position, and is prevented
from being lowered until the
Head Release Lever (see fig.1
page 8) is moved sideways.
Fig.3
Fig 2
9