Clarke Woodworker CMS254, Инструкция по эксплуатации и обслуживанию

Страница: 4 / 21

GENERAL SAFETY RULES FOR OPERATING MACHINERY
WARNING:
As with all machinery, there are certain hazards involved with their
operation and use. Exercising respect and caution will considerably
lessen the risk of personal injury.
However, if normal safety precautions are overlooked or ignored,
personal injury to the operator or damage to property, may result.
1. READ and BECOME FAMILIAR with the entire operating manual.
Learn the machines’ applications and limitations as well as the
specific potential hazards peculiar to it.
2. EARTH ALL MACHINES. If the machine is equipped with three-pin
plug it should be plugged into a three-pin electrical socket. Never
remove the earth pin.
3. ALWAYS ensure that ADEQUATE LIGHTING is available. A minimum
intensity of 300 lux should be provided. Ensure that lighting is placed
so that you will not be working in your own shadow.
4. CHECK for DAMAGE. Before using the machine, any damaged part,
such as a guard etc., should be checked to ensure that it will
operate properly, and perform its intended function. Check for
alignment of moving parts, breakage of parts, mountings, and any
other condition that may affect the machines’ operation. Any
damage should be properly repaired or the part replaced. If in
doubt, DO NOT USE the machine. Consult your local dealer.
5. DISCONNECT the MACHINE from the power supply before servicing
and when changing accessories such as blades, etc.
6. KEEP GUARDS in place and in working order.
7. ALWAYS WEAR SAFETY GOGGLES, manufactured to the latest
European Safety Standards. Also use a face or dust mask if the
cutting operation is dusty. Everyday eyeglasses do not have impact
resistant lenses, they are NOT safety glasses.
8. KEEP WORK AREA CLEAN. Cluttered areas and benches invite
accidents.
9. ALWAYS WEAR EAR PROTECTORS/DEFENDERS.
10. DON’T FORCE the Machine. It will do a better and safer job at the
rate for which it was designed.
SAFETY PRECAUTIONS
4