Clarke WCP150, Руководство по эксплуатации и техническому обслуживанию

Страница: 5 / 16

Fig 5
5
CONNECTIONS (FIG 5)
1. Connect the wind and rain sensors
to the Thermo-Hygro sensor as
shown.
Fig 6
FITTING THE THERMO-HYGRO SENSOR
TO THE MAST (FIG 6)
1. Loosen the four bolts on the second
support arm.
2. Fix the support arm to the mast as
shown and retighten the bolts.
3. Place the thermo-hygro sensor
onto the support arm and secure it
using the Ø3x20 mm screw
supplied.
4. Slide the cover over sensor as
shown.
Fig 7
OUTDOOR FIXING (FIG 7)
1. Route the wires neatly and secure
into position using the cable ties
supplied.
2. Fit the mast to a fixed pole using
the 2 jubilee clips provided.
IMPORTANT: For accurate readings
the sensor mast should be mounted
in an open area away from trees or
coverings which may affect wind
and rain measurments.