Clarke WCP150, Руководство по эксплуатации и техническому обслуживанию

Страница: 12 / 16

12
THE ALARM
When an outdoor weather alarm has been triggered, it will flash on the LCD
display. The general outdoor alarm icon and high/low alarm icon will flash.
CANCELLING THE ALARM WHILE SOUNDING
When an alarm has been activated, it will sound for a maximum of 120
seconds. The LCD display will also flash.
• Press any key to mute the alarm.
If the weather conditions trigger the alarm again within 10 minutes the alarm
will not sound. The LCD will still flash until weather conditions goes above or
below the trigger value depending on the alarm which has activated.
The alarm will reset automatically once the current weather condition goes
above or below the trigger value, or if a new value is entered.
MIN/MAX MODE
1. Press the MIN/MAX key to enter the maximum mode:
• The MAX icon and the maximum recorded values will be displayed.
2. Press MIN/MAX key again to enter the minimum mode.
• The MIN icon and minimum record values will be displayed.
3. Press MIN/MAX key again to return the Normal Mode.
IN THE MAXIMUM/MINIMUM MODE
1. Press the + key to cycle through the following values together with the time
and date at which these values were recorded.
1 Indoor humidity 7 Gust speed (Max mode only)
2 Indoor temperature 8 1 Hour rain (Max mode only)
3 Outdoor humidity 9 24 Hour rain (Max mode only)
4 Outdoor temperature 10 Week rain (Max mode only)
5 Pressure 11 Month rain (Max mode only)
6 Wind speed (Max mode only)
2. When flashing, press the SET key to reset the parameter to the current
value.
3. Press the HISTORY button to return to Normal Mode.