Clarke MIG220TE, Инструкция по эксплуатации и обслуживанию

Страница: 13 / 36

13
UNPACKING & PARTS IDENTIFICATION
Unpack and lay out the components, checking against the following list. Any damage or
deficiency should be reported to your CLARKE dealer immediately.
Some components are stored within the side compartment. To open the compartment, slide
the recessed handle backwards.
1. Welder complete with power cable and gas hose.
2. 2 x Wheels
3. 2 x Castors
4. 1 x Tubular Axle
5. 1 x Handle
6. 1 x Welding Mask
7. 1 x Welding Mask Handle
8. 1 x Package containing 1x Clear Glass and 1x Dark Glass Lens
9. 1 x Package containing 6 screws and nuts for welding mask
10.1 x Gas Regulator with nut and tail connector.
11.1 x Package containing:
a. 2 x circlips for wheel axle (wheel retainers)
b. 2 x Hex. socket head screws for securing the handle.
c. Worm drive hose clip for gas hose to regulator
d. 3 x spare welding tips...0.6mm and 0.8mm
NOTE: A 0.6mm tip is also fitted to the torch
12. Torch & Hose Assembly
13. Earth Lead Assembly
Fig.1