Clarke Log Buster 3, Инструкция по эксплуатации и техническому обслуживанию

Страница: 13 / 18

IMPORTANT: use ONLY CLARKE HYDRAULIC OIL, available
from your nearest dealer.
Part No: 1Ltr - 3050830
5Ltr - 3050835
3.5 Wipe the dipstick, using a clean soft cloth and check
the oil level as before, and add more oil as required.
3.6 Clean the filler neck and plug/dipstick washer/seal
thoroughly and refit, tighten sufficiently to prevent
oil leaking, DO NOT overtighten.
3.7 Carefully return machine to normal working position.
3.8 Finally, tighten the breather screw, and refit the safety cover removed earlier
WARNING:
Dispose of used oil according to local authority regulations.
4. Wedge sharpening
After long periods of operation, the splitting wedge will become blunt and require sharpening.
To do this, simply remove burrs and flat spots using a fine file.
Fig. 17
Jam Clearing
Use extreme care when clearing jammed logs, to do this proceed as follows.
1. Release both control levers, the log pusher returns
to its home position.
2. Insert a wedge (triangular block of wood), under
the jammed log (see Fig. 18). activate the log
splitter in the normal way, the wedge forces
jammed log upwards and off the wedge.
It may be necessary to repeat the operation, using
larger wedges until the jammed log is completely free.
WARNING:
NEVER ask for assistance of another person when operating
this machine, this instruction applies especially with jam
clearing. Keep hands clear of jammed log and moving
parts when attempting to free jammed logs.
Fig. 18
-13-