EN
ENGLISH
-10-
Clarke
®
American Sanders
Operator's Manual (EN) - Floorcrafter
MAINTENANCE
WARNING: Maintenance must be done by authorized personnel only.
CAUTION:
Keep all adjustments according to specifications.
Maintenance Instructions
Return the machine to a Clarke American Sanders Authorized Service Location every 12 months for maintenance inspections.
Switches
WARNING: All electrical repairs must be done by authorized personnel only. The machine must be tested after electrical
repairs to make sure it is safe to operate. Disconnect the electrical plug from the electrical outlet before doing any electrical
repairs.
The start and stop switch has an interlock which prevents the contacts from being closed. If any part of the switch is not operating,
replace the part. If any part of the electrical system of the machine is not operating or is damaged, replace the part. Make sure all
connections are tight. Return the machine to the Clarke American Sanders Service Branch or a Clarke American Sanders Authorized
Service Center for electrical repairs or testing.
Maintenance Of The Motor
Induction type motors do not require motor brushes.
If repairs to the gear unit or motor are needed, do not disassemble the gears and motor. Return the machine to the nearest Clarke
American Sanders Service Branch or Clarke American Sanders Authorized Service Center.
For safe operation, and longer life to your Clarke American Sanders product, use only Clarke American Sanders parts.
NOTE: The grease (503802) for the gear box needs to be changed every year. The Sander 1600 and 1600DC require 8 oz. of grease.
Machine Specifications
Model
Sander
1600DC
Code Number
07101B
Voltage (Volts)
120
Frequency (Hz)
60
Current (Amps)
14
Power (hp)
1.5
Pad Diameter
16.0
Pad Speed (rpm)
175
Cord Length (feet)
50
Weight (pounds)
121
