9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ADVANCED CHARGING MODES
The following modes are advanced charging modes that require your full
attention before selecting.
USING 12V BOOST
1. Connect the charger to the battery as shown on page 7 and switch on at
the mains power supply.
2. Allow the charger to start charging after an initial 10 second wait.
3. Press the BOOST/QUICK CHARGE button to start the boost charge mode
• For optimum results, allow boost to complete its 5-minute charge cycle.
• After 5 minutes the display will show
“000”, and you are ready to start your
vehicle.
• After each boost, the charger has a
mandatory 5-minute rest for safety
reasons (even if you press the BOOST/
QUICK CHARGE button again, the
charger will not work).
• After cooling, the LCD shows “End”
4. Press any button to enter the normal
charging mode, or the charger will
automatically enter the normal
charging mode after 10 minutes.
5. If unsuccessful when starting your
vehicle, let the battery rest for 15
minutes and try boost again. Most
vehicles will start with one boost.
WARNING: DO NOT USE BOOST MORE THAN TWO TIMES IN A 24-HOUR
PERIOD. IF TWO BOOSTS CANNOT SUCCESSFULLY START YOUR VEHICLE,
HAVE YOUR BATTERY REPLACED OR EVALUATED BY A LOCAL BATTERY
STORE.
Содержание IBC25
Страница 16: ......
