8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
1. Connect the battery as described on page 8.
2. Plug in the mains plug and switch it on.
3. The charger will automatically detect the battery voltage (12V or 24V).
4. After 10 seconds the charger will begin charging the battery using the
following mode 12V/5A or 24V/3.5A.
• The user can manually select charging voltage / current modes by
pressing the "VOLTAGE" or “CURRENT” button within the first 10 seconds
after switching on (a countdown is shown on the LCD).
NOTE:
If you choose 24V Mode(s) for 12V battery, the 12V battery will be
damaged
• Once the battery type has been selected successfully and charging is
started, you must disconnect the AC plug and plug in again if you want
to change the battery type mode of the charger.
• During charging, the display will show voltage (12V or 24V) and
charging current alternately.
• When the "VOLTAGE" button is pressed, the display shows battery
voltage (e.g. 12.1 V) .
5. During charging, pressing the "CHARGE" button will cause the charger to
turn off.
• The charger will be restarted by pressing "CHARGE" button again.
6. Battery level is indicated by the "battery level icon". When the battery is
fully charged, the charger will automatically switch from full charge to
maintenance status without overcharging or damaging the battery.
BATTERY LEVEL INDICATOR
L
EVEL
I
CON
E
XPLANATION
L
EVEL
I
CON
E
XPLANATION
The 25% bar will slowly flash
when the battery level is less
than 25%. When 25% is
reached, the bar will be
solid.
The 50% bar will slowly flash
when the battery level is less
than 50%. When 50% is
reached, the bar will be solid.
The 75% bar will slowly flash
when the battery level is less
than 75%. When 75% is
reached, the bar will be
solid.
The 100% bar will slowly flash
when the battery level is less
than 100%. When 100% is
reached, the bar will be solid.
Meanwhile the maintenance
charging is activated.
Содержание IBC25
Страница 16: ......
