7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CONNECTING TO THE BATTERY
1. Identify the polarity of battery posts. The positive battery terminal is
typically marked by these letters or symbol (POS,P,+). The negative battery
terminal is typically marked by these letters or symbol (NEG,N,-).
2. DO NOT make any connections to the carburetor, fuel lines, or thin metal
parts.
3. Identify if you have a negative or positive grounded vehicle. This can be
done by identifying which battery post (NEG or POS) is connected to the
chassis.
•
FOR A NEGATIVE GROUNDED VEHICLE (MOST COMMON):
connect the
RED POSITIVE clamp first to the positive battery terminal, then connect
the BLACK NEGATIVE clamp to the negative battery terminal or vehicle
chassis.
•
FOR A POSITIVE GROUNDED VEHICLE (VERY UNCOMMON):
connect the
BLACK NEGATIVE clamp first to the negative battery terminal, then
connect the RED POSITIVE clamp to the positive battery terminal or
vehicle chassis.
4. When disconnecting, disconnect in the reverse sequence, removing the
negative first (or positive first for positive ground systems).
CHARGING MODES
CAUTION: A MARINE (BOAT) BATTERY MUST BE REMOVED AND
CHARGED ON SHORE. TO CHARGE IT ON BOARD REQUIRES EQUIPMENT
SPECIALLY DESIGNED FOR MARINE USE.
S
ELECT
M
ODE
F
OR
B
ATTERY
S
IZE
(A
H
)
12V 5A
2-60
12V 10A
14-200
12V 15A
50-400
12V 25A
>75AH
24V 3.5A
2-100
24V 7.5A
14-200
24V 12A
36-350
12V 40A BOOST
Any Capacity
12V ALTERNATOR CHECK
Any Capacity
Содержание IBC25
Страница 16: ......
