14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ADJUSTING THE PRESSURE
Reach into the access window and
turn the pressure adjustment valve.
• Turn clockwise (1) to increase
the pressure.
• Turn anti-clockwise (2) to
decrease the pressure.
TOTAL STOP SYSTEM
NOTE:
The washer is fitted with a total stop system. When the trigger is
released the motor will stop. This system is designed to protect the
motor and is also an important safety feature.
AFTER USE
1. Set the mode selector (A) to
position 1 (OFF)
2. Turn water supply off at the tap.
• NEVER turn the water off with
the pressure washer running.
3. Release the pressure in the pump
and hose by squeezing the trigger
for a few seconds until no more
water comes out of the nozzle.
4. Move the trigger lock to the
locked position.
5. Store the pressure washer in a dry
safe place to prevent
unauthorised persons from using it.
WARNING: MAKE SURE THE OPERATING PRESSURE DOES NOT EXCEED THE
MAXIMUM PRESSURE INDICATED ON THE RATING PLATE
HLS160 3 Phase hot wash.fm Page 14 Wednesday, September 28, 2011 12:28 PM
Содержание HLS160
Страница 24: ......