Clarke ENCORE MAX, Руководство оператора и список запчастей, Страница: 61 / 61

CLARKE 1-61
ENCORE MAX
TRIO SCRUBBER DIAGNOSTIC CODES CON’T.
7601
7602
7603
7604
7700
7701
7702
7703
7800
7801
7802
7900
7901
Soft brush current
foldback
Soft brush current
foldback 2
Soft brush current
foldback 3
Brush inhibit active
Soft vacuum motor
disconnected error
Soft vacuum current
foldback
Soft vacuum current
foldback 2
Soft vacuum current
foldback 3
Motor fault 1
Traction over current
error
Traction motor in
foldback state
Emergency stop
error
Belly button switch
activated
Brush current overload Incorrect programming, incorrectly specified
(“thermal” trip). brush motor, brush motor developing fault,
excessive resistance on brushes or brushes
pushing down too hard on floor.
Brush current overload Incorrectly specified brush motor; brush motor
(“magnetic” trip). developing fault.
Possible short circuit on brush Check brush motor connection on Trio, check
motors or wiring. wiring from this connection all the way down to
brush motor. Otherwise, possible brush motor
fault.
Dependent on programming. Incorrect software program-check program.
Otherwise, possible controller fault.
Open circuit on vac motors or Check vac motor connection at Trio; check this
vac motor wiring. conection down to vac motor & all wiring in
between. Otherwise, possible vac motor fault.
Vacuum current overload Incorrect programming; incorrectly specified vac
(“thermal” trip). motor; vac motor developing fault; debris in vac
motor or airways blocked by debris.
Vacuum current overload Incorrect programming; incorrectly specified vac
(“magnetic” trip). motor; vac motor developing fault.
Possible short circuit on vac Check vac motor connection at Trio; check this
motor or vac motor wiring conection down to vac motor & all wiring in
between. Otherwise, possible vac motor fault.
Open circuit on traction motor or Check traction motor connection on Trio; check
traction motor wiring. wiring from this connector down to traction
motor & all connections in between. Otherwise,
possible traction motor fault.
Possible short circuit on traction Check traction motor connection on Trio; check
motor or wiring. wiring from this connector down to traction
motor & all connections in between. Otherwise,
possible traction motor fault.
Traction motor current has Excessive driving up incline or machine has
exceeded limit for foldback time. been up against an obstacle or step.
E-stop input active or wiring fault. Check for wiring short circuits on Trio’s 20-way
connector, the LCD’s 16-way connector (if used)
& the wiring to emergency stop switch & switch
itself. Otherwise, incorrect operation of machine.
E-stop input active or wiring fault Check for wiring short circuits on Trio’s 20-way
(programmed as belly button). connector, the LCD’s 16-way connector (if used)
& the wiring to emergency stop switch & switch
itself. Otherwise, incorrect operation of machine.