
CLARKE
1-35
ENCORE MAX
DRAIN HOSE
DRAIN HOSE PLUG
DRAIN HOSE
DRAIN HOSE PLUG
DRAINING RECOVERY TANK
TO DRAIN RECOVERY TANK
The drain hose for the recovery tank is located on the back of the machine. To drain the tank, remove and lower
the hose and place in a suitable floor drain as shown in figure 37. Open the drain hose plug as shown in figure
35 and 36.
IMPORTANT
Improper discharge of wastewater will damage the environment and is illegal. The U.S.
Environmental Protection Agency has established certain regulations regarding discharge of
wastewater. The local city and state regulations regarding wastewater discharge may be in effect
in your area. Understand and follow the regulations in your area. Be aware of the environmental
hazards associated with the substances you dispose of.
OPERATING INSTRUCTIONS
POST OPERATION CHECKLIST
Check Battery Condition and recharge, if necessary.
1.
Check all flaps for wear, damage and adjustment.
2.
Drain and clean recovery tank.
3.
Clean recovery tank screen and float.
4.
Check scrub brushes for wear or damage.
5.
Check rear and side squeegee for wear, damage and adjustment.
Fig. 35
Fig. 36
Fig. 37
Содержание ENCORE MAX
