Clarke ELS140, Инструкция по эксплуатации и обслуживанию

Страница: 6 / 14

ASSEMBLY AND PREPARATION
The machine is supplied fully assembled except as detailed below.
Model ELS150
The Lance is also in two sections, but assembled by screwing the two halves
together. The high pressure hose is screwed to the adapter, just forward of the
trigger assembly
6
Fig.1
Model ELS140
.
The lance is in two sections, the high
pressure hose being integral with
the lance handle and trigger
assembly.
Assemble by slotting the spigot end
of the lance into the handle
assembly. Push in firmly and twist to
lock it in position as shown in Fig. 1.
Fig.2
Model ELS140R
The high pressure hose is fitted to a reel
at the back of the machine.
It is necessary to attach the handle to the
reel, as shown in Fig.3.
Connect the connecting hose to the inlet on
the reel and water outlet on the machine.
See parts diagram, p10.
Fig.3