Clarke ELS140 Скачать руководство пользователя страница 4

WARNING

Water at high pressure can be dangerous and may cause severe

damage to persons or property if subject to misuse.

NEVER allow anyone to operate this equipment unless they are

thoroughly reliable, and completely familiar with the safety precautions.

1.

Never direct the spray jet at any person or animal.

2.

Never hold a finger over the high pressure nozzle.

3.

Never direct the spray jet at the machine itself or any other electrical
equipment.

4.

After use, and before disconnecting hoses, release the pressure in the high
pressure hose by operating the trigger. Do not attempt to disconnect any
hose or coupling with pressure still in the hose.

5.

Never operate the machine with the covers removed.

6.

Do not, attempt any electrical or mechanical repair. If you have a problem
with your machine contact your local dealer or Clarke Customer Services
Dept., tel: 020 8556 4443

7.

Never supply any liquid other than water to the water inlet.

8.

Use only chemical cleaning agents (detergents) approved for power washing
when using the chemical injection facility.

9.

Never use the chemical injection facility to introduce solvents eg. paint
thinners, petrol, oil, etc.

10.  Do not operate the machine whilst standing on ladders: use a platform tower

or scaffolding.

11.  Children should NOT be allowed to use the machine.

12.  You should always wear the appropriate protective clothing and non-slip

shoes when operating this machine. We also recommend the use of safety
goggles for any application where loose particles of stone or grit etc. may be
blown around by the high pressure spray.

13.  When not in use, disconnect from the electrical supply and disconnect the

hoses from the machine, ensuring they are drained of water. Store in a dry,
frost free environment. Failing this, ensure the pump is filled with anti freeze.
(See Maintenance).

14.  Disconnect from the mains supply before carrying out any maintenance or

servicing.

15.  Never pull the washer by the power cable, or yank the cable to disconnect it

from the socket. Keep the cable away from heat, oil or sharp edges.

SAFETY PRECAUTIONS

4

Содержание ELS140















Отзывы: