Page 41 of 49
IMPORTANT: Set main pump controller to “OFF”
while servicing engine. Before turning the main
pump controller to the "OFF" position, check with
the maintenance and security supervisors to verify
that all the departments concerned will be alerted of
the temporary interruption of their fire protection
equipment for normal maintenance or testing. Also,
alert the local fire department in the event that the
main pump controller is connected by silent alarm to
headquarters. When servicing is complete, return
main pump controller selector to "Automatic"
position and the mode selector on the engine to
“Automatic” position. Advise the appropriate
personnel the engine has been returned to the
“Automatic”.
5.0
TROUBLE SHOOTING
Consult Clarke Service Dealer or Factory. Service
dealers can be located by going to our website:
. For trouble shooting pertaining
to the flashing of the "OVERSPEED SHUTDOWN"
lamp, see section 3.5.5.
6.0
PARTS INFORMATION
6.1 SPARE PARTS
To ensure best operation and efficiency of all engine
components, always use genuine Clarke spare parts.
Orders should specify:
•
Engine Model Number - See Engine General
•
Engine Serial Number - Specification
•
Part Number(s) Refer to Engine Maintenance
Parts List section 6.2 or Parts Illustration (see
Page 5).
Contact numbers for spare parts:
• www.clarkefire.com
• Phone USA: (513) 771-2200 Ext. 427 (calling
within USA)
• Phone UK: (44) 1236 429946 (calling outside USA)
• Fax USA: (513) 771-5375 (calling within USA)
• Fax UK: (44) 1236 427274 (calling outside USA)
• E-Mail USA:
6.2
ENGINE MAINTENANCE PARTS LIST
Refer to Appendix “A” at the end of this manual.
ENGINE
Air Filter Service
Air Filter Oil
MODEL
Kit
All
99-55050
C121157
Figure #39
7.0
OWNER ASSISTANCE
Consult Clarke Service Dealer or Factory. Service
Dealers can be located by going to our website:
www.clarkefire.com.
8.0 WARRANTY
8.1 GENERAL WARRANTY STATEMENT
The satisfactory performance of Clarke engines and
the goodwill of owners / operators of Clarke engines
are of primary concern to the Engine Manufacturer,
the Engine Service Dealer and Clarke. All provide
support of these products after final installation of the
complete fire pump and sprinkler system.
Warranty responsibility involves both Clarke and the
Doosan service organizations worldwide.
The
Engine
Manufacturer
(Doosan)
provides
Warranty for the basic engine components and Clarke
provides warranty on the accessories added to meet
the NFPA-20 specifications and FM/UL certification
requirements.
8.2 CLARKE WARRANTY
All Clarke warranted components have warranty
Duration of 24 months beginning at the Start-up date
of the fire pump system. The warranty coverage
includes replacement of the part and reasonable cost
of labor for installation. Components failed due to
improper engine installation, transportation damage,
or misuse is not covered under this warranty.
For additional warranty details, see the specific
warranty statement “Doosan New Engine Warranty”
on the following page. Also contact Clarke direct if
you have any questions or require additional
information.
Clarke is not responsible for incidental or
consequential costs, damage or expenses which the
owner may incur as a result of a malfunction or
failure covered by this warranty.
8.3 DOOSAN WARRANTY
WARRANTY POLICY
