background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Router Table designed for DIY use only 
and is ideal for use with a CLARKE CR1C router or other routers up to155mm 
dia base plate

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

SPECIFICATION

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the obligation to 
deal with the WEEE in accordance with the WEEE regulations in relation to the 
treatment, recycling & recovery and environmentally sound disposal of the 
WEEE.

In effect, this means that this product must not be disposed of with general 
household waste. It must be disposed of according to the laws governing 
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal 
facility.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

Net Weight

7kg

Dimensions L x W x H

865 x 375 x 390mm

Содержание CRT1





















Отзывы: