manualshive.com logo in svg

Clarke CR4, Инструкция по эксплуатации и техническому обслуживанию, Страница: 19 / 24

Поделиться
Скачать
Clarke CR4 Скачать руководство пользователя страница 19

19

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

1. Remove the two plastic pads from 

the parallel guide by removing 
the four screws.

2. Attach the Roller Guide using two 

of the screws to the two inner 
threaded holes of the parallel 
guide.

• The Roller Guide wheel should 

face away from the parallel 
guide, so that the wheel faces 
the cutter.

3. Attach the parallel guide fitted 

with the Roller Guide to the router 
using both guide rods, and secure 
using the guide rod locking knobs.

4. Adjust the distance between the 

router bit and roller by loosening 
the guide rod locking knob on 
each side and positioning the 
Roller Guide at the correct 
distance. Tighten the Knobs to set 
the position.

5. Adjust the Roller Guide height if required using the wing nut.

6. To use, hold the router securely with both hands and make the cut by 

allowing the Roller Guide to follow the outline shape of the wood. This can 
be used for curved workpieces.

NOTE:

Ensure the Roller Guide wheel is kept clean and rotates freely. 
Lubricate with a suitable PTFE spray if necessary.

USING THE WIDTH MEASURING SCALE

1. With your chosen router bit fitted, 

press down on the router so that 
the bit protrudes below the base 
plate. Lock the router in that 
position.

2. Slide the parallel guide assembly 

forward until the working face of 
the guide is in line with the cutting 
edge of the bit.

3. Rotate the bit so that one of the 

two cutting blades is in line with the face of the guide.

Содержание CR4

























Отзывы:

Нет отзывов