Clarke CR4 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 24

Clarke CR4 Скачать руководство пользователя страница 17

17

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

MAKING A TEMPLATE

Router templates must have a minimum thickness of 6 mm and can be home
made or shop bought.

When making templates, you must remember to allow for the distance from
the edge of the guide bush to the edge of the bit, this is known as the offset.

CALCULATIONS FOR THE TEMPLATE OFFSET

The offset is calculated as follows:

• (The outer diameter of the guide bush minus (-) the diameter of the

cutter) divided by 2.

For example, if you use the supplied 22 mm guide bush and a 12 mm router
cutter the offset would be 5 mm.

USING THE TEMPLATE GUIDE BUSH

The Guide Bush Plate should be used
when template/jig cutting.

1. Remove the dust extraction port

(14) by first removing the two bolts
and nuts that secure it.

2. Remove the protective plastic

pad from underneath the base
plate by removing the four screws
that secure it.

3. On the internal side of the plastic

pad fit the Guide Bush Plate into the recess with the bush (circular flange)
facing downwards below the router.

4. Refit the plastic pad with the four screws.

5. Refit the dust extraction port.

«
...
15
16
17
18
19
...
»

Содержание CR4

























Отзывы:

Нет отзывов