Clarke CR4 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 24

Clarke CR4 Скачать руководство пользователя страница 14

14

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

USING THE MULTI-STOP TURRET

The multi-stop turret can be used to assist in making multiple passes. Using the
turret in this manner removes the necessity for resetting the depth stop for
each pass. Each stop on the turret is approximately 3 mm.

1. With the total depth set and the

router raised fully, turn the turret to
its highest position.

2. Make the first pass across the

wood.

3. Rotate the turret to a lower setting

and make the second pass.

4. Repeat this until the final cut is

made.

CHANGING THE SPINDLE SPEED

The router speed is infinitely variable
from 8000 to 23000 rpm.

1. Turn the speed control to the

required setting.

• Generally, the larger the

diameter of the bit, the slower
the tool speed should be

• The correct setting will also

depend on the density of the
material being cut, the feed
speed and the depth of cut.

2. It is advisable to make practice cuts on a piece of scrap timber to

determine the best speed as a large loss of RPM will overload the motor.

FEED DIRECTION

Remember that the direction the bit
is fed into the wood must always be
against the direction of rotation as
shown in the diagram on the right.

This ensures a quality finish and also
ensures that the cutting action pulls
the router into the wood.

«
...
12
13
14
15
16
...
»

Содержание CR4

























Отзывы:

Нет отзывов