14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10. Repeat steps 2 - 9 for the installing/changing the second blade. It is
important to reverse or replace the two blades at the same time so they
are balanced with one another. Both blades must be set to the same
cutting level and alignment, otherwise the planed surface will be rough
and uneven.
MAINTENANCE AND SERVICING
CLEANING
• Keep the planer clean of any wood chips, dust, dirt or debris.
• Ventilation openings must be kept clean and free of foreign matter.
• The planer can be cleaned most effectively with compressed dry air.
Always wear safety goggles when cleaning power tools with
compressed air.
LUBRICATION
Your tool has been correctly lubricated and is ready to use. It is recommended
the gears be regreased with a gear lubricant at every carbon brush change.
CAUTION: TIGHTEN ALL CLAMPING SCREWS CAREFULLY WHEN
ATTACHING THE BLADES TO THE PLANER. A LOOSE CLAMPING SCREW
CAN BE EXTREMELY DANGEROUS. CHECK REGULARLY TO MAKE SURE
THAT ALL SIX CLAMPING SCREWS ARE TIGHTENED SECURELY.
WARNING: MAKE SURE THAT THE PLANER IS TURNED OFF AND
UNPLUGGED FROM THE POWER SOURCE BEFORE CLEANING AND
MAINTENANCE OPERATIONS.
WARNING: REFER TO YOUR CLARKE DEALER IF INTERNAL MAINTENANCE IS
NECESSARY.
WARNING: CERTAIN CLEANING AGENTS AND SOLVENTS DAMAGE
PLASTIC PARTS. SOME OF THESE ARE: GASOLINE, CARBON
TETRACHLORIDE, CHLORINATED CLEANING SOLVENTS, AMMONIA AND
HOUSEHOLD DETERGENTS THAT CONTAIN AMMONIA.
Содержание CEP450
Страница 20: ......
