brackets from time to time. Adjustments can be made by loosening the mounting
screw, and positioning the bracket accordingly, remembering to re-tighten the
screw once adjustment is complete.
The see-through Eye Shields allow the user to see the operation clearly, and to work
precisely. The eye shields can be adjusted on their pivots to suit the operator.
IMPORTANT: Even though Eye Shields are fitted, you should nevertheless, ALWAYS
wear safety goggles when operating a grinding machine.
B. TOOL REST ADJUSTMENT
The appropriate adjustment of the tool rests provides the operator with a correct
working angle and a firm and efficient base for working. A gap of approx. 1/16"
between the wheel and tool rest should be maintained at all times. Due to wear on
the grinding wheel, it is necessary to adjust the tool rests from time to time.
Adjustments can be made by loosening the mounting screws, and positioning the
tool rest accordingly, remembering to re-tighten the screws once adjustment is
complete.
C. CHANGING THE GRINDING / WIRE WHEEL
1.
Remove outside wheel cover, by unscrewing the cover retaining bolts, and
slacken the Tool Rest and Spark Arrester mounting screws.
2.
Holding the wheel firmly, remove the nut and flange using the correct size
spanner, noting that the left wheel nut carries a left hand thread.
IMPORTANT: Always wear a heavy duty glove to hold a wire wheel.
3.
Take off the used wheel and replace with a new one, ensuring the blotter is in
place between the wheel and flange. Do not overtighten the nut - holding
the wheel with your hand will enable you to apply sufficient force to tighten
the nut effectively.
4.
Re-assemble, steps A & B as detailed above, ensuring that there is a good
balanced rotation of the wheel.
5.
Switch on the machine and allow the wheel to rotate freely, for at least 1
minute.
D. DRESSING THE WHEEL
It will be necessary from time to time to dress the wheel, to obtain a true working
surface. This should be done ONLY with an approved dressing tool, which can be
obtained from your CLARKE dealer, quoting Model Number GWD-1. Part No.
6501120.
E. OPERATING THE LAMP
(CBG6RL and CBG8RL only)
The lamp is provided with a rotary type switch located at the rear of the lamp
shade. Simply turn the switch to turn ON and OFF
7
Содержание CBG6RL
Страница 9: ...8 PARTS DIAGRAM...
