8.
WEAR THE PROPER APPAREL. No loose clothing, gloves, neckties, rings,
bracelets, or any other jewellery which might get caught in moving parts.
Non-slip footwear is recommended. Long hair should be contained.
9.
ALWAYS USE SAFETY GLASSES. Everyday glasses only have impact resistant
lenses, they are not safety glasses. Also use a face mask if a lot of dust is
generated.
10. DO NOT OVERREACH. Keep a firm footing and proper balance at all times.
11. DISCONNECT FROM THE MAINS before attempting any kind of service work or
adjustment or when changing accessories such as grinding wheels.
12. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest
performance.
13. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in the OFF
position before plugging in.
14. CHECK FOR DAMAGED PARTS. Before using the machine, always check parts
for signs of damage, and to ensure they are secure. If a component suffers
slight damage, (eg. a distorted guard or bracket), make sure it will perform its
intended function properly before switching on. If in doubt, do not use the
machine. ALWAYS be prepared to SWITCH OFF IMMEDIATELY, if you
experience unusual noises, or excessive vibration. Do not use the machine
until the fault is fully rectified.
ADDITIONAL SAFETY RULES FOR BENCH GRINDERS
1.
Replace a cracked wheel immediately.
2.
Always use guards and eye shield
3.
Do not overtighten wheel nut.
4.
Maintain the distance between wheel and tool rest to 1/16 (1.6mm) or less as
the diameter of the wheel decreases with use.
5.
Use a grinding wheel suitable for the speed of grinder. (See technical data).
6.
Stand to one side of bench grinder during operation, not directly in front.
7.
One minute of free rotation is necessary for a new grinding wheel. Should the
new grinding wheel be faulty and break, it will happen within the first minute
of operation.
8.
Do not remove the wheel guard except when changing a worn wheel.
9.
Do not use the grinding wheel for any kind of cutting.
10. Do not use the side of the wheel for any reason.
11. Do not over stress the grinding wheel.
12. NEVER leave a grinder running unattended. Turn power off. Do not leave tool
until it comes to a complete stop.
13. Use ONLY approved replacement grinding wheels. Contact your local dealer
for approved replacement grinding wheels. The use of inferior parts may risk
of injury.
3
Содержание CBG6RL
Страница 9: ...8 PARTS DIAGRAM...
