2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this EPC1200 Electronic Pump Controller.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
Please keep these instructions in a safe place for future reference.
APPLICATIONS
This controller can be used to convert water pumps into automatic booster
sets and provides 2 main functions:
1. It provides automatic operation of your pump.
• This in-line device maintains water pressure from booster pumps by
instantly sensing water usage and automatically starting or stopping
the pump.
2. It protects the pump from running dry.
• The EPC1200 controller has a built in safety circuit which switches the
pump off when there is no water flow.
• The controller performs pump control operations automatically.
Only use the controller in conjunction with clean water which is free of mineral
particles in suspension.
DESIGN FEATURES
• Automatic and manual modes.
• In Auto mode, the pump will start without adjusting the starting
pressure. The pump will also stop automatically in case of water
shortage.
• The pump can start automatically when the power supply returns
after power failure.
• Manual mandatory startup.
• Over-pressure protection;- if the system pressure is over 10 bar, the
unit automatically stops the pump.
• Water shortage self-start. The time interval of self-start is 1 minute, 30
minutes, 1 hour and then in a 1 hour cycle.
• Built-in pressure sensor and LED display.
Содержание 7230699
Страница 16: ......