7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
1. Pass the axle through the wheel
frame as shown
2. Place a spacer onto each end.
3. Place a wheel on to each end.
4. Place a flat washer onto each
end
5. Secure everything in place by
inserting a split pin into the small
hole at the end of the axle.
6. Place the handle into position
and secure using four 50 mm bolts
and nuts provided (2 each side).
7. Place the wheel assembly into
position and secure using four
30 mm bolts and nuts provided (2
each side).
Содержание 6931004
Страница 16: ......
