Clarke 6560005 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 36

background image

4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

ADDITIONAL SAFETY INSTRUCTIONS FOR 3-IN-1
SHEET METAL MACHINES

1. OVERLOADING. Attempting to overload this machine beyond the

capacities specified in the “Specifications” on page 35 could cause
personal injury or property damage. DO NOT extend the hand crank to
apply additional force.

2. USAGE. To avoid injury or property damage, always use the machine for its

intended purposes, DO NOT modify the machine in any way.

3. METAL EDGES. Sharp metal edges can cut your fingers. ALWAYS chamfer

and de-burr sharp sheet metal edges before bending and after cutting the
workpiece.

4. PINCHING. This machine represents severe pinching and amputation

hazards. ALWAYS keep hands away from the rollers, brake fingers, clamping
bar, and shearing blades when operating.

5. PERSONAL PROTECTION. To avoid personal injury, ALWAYS wear heavy

leather gloves, eye protection, and leather boots with extra toe protection
when using this machine.

6. BODY POSITION. To avoid injury due to slipping or falling, ALWAYS maintain

secure footing and a comfortable body position when using this machine.

7. GOOD WORKING CONDITION. To reduce the risk of personal injury, ALWAYS

inspect the working parts of this machine for cracks, burrs, loose fasteners,
or any other damage and resolve any issue before beginning operation.

8. WORKBENCH MOUNTING. Personal injury could occur if this machine should

unexpectedly move during operation. ALWAYS make sure the machine is
securely mounted to a stable workbench or stand that can support the
weight and pressures of the operation.

9. ENTANGLEMENT HAZARDS. The moving parts of this machine represent

entanglement hazards. DO NOT wear jewelry, or loose clothing, and tie
back long hair when using this machine.

10. SHEARING BLADES/BRAKE FINGERS. If not properly aligned, the shearing

blades or brake fingers can cause machine parts or the workpiece to
break up and fly towards the operator. ALWAYS keep these parts properly
adjusted and in good working condition..

«
...
2
3
4
5
6
...
»

Содержание 6560005





































Отзывы:

Нет отзывов

Похожие инструкции для 6560005

Бренд: SAMCHULLY Страницы: 24

Бренд: Jet Страницы: 12

Бренд: Stanley Страницы: 233

Бренд: Dake Страницы: 17

Бренд: Porter-Cable Страницы: 40

Бренд: Hilti Страницы: 56

Бренд: Stanley Страницы: 84

SOLARLOK PN 1-1579004-1

Бренд: TE Connectivity Страницы: 47

Бренд: TREND Страницы: 19

Бренд: Bell Страницы: 16

Бренд: Band-it Страницы: 2

Бренд: Far Tools Страницы: 23

Бренд: Belle Страницы: 18

Бренд: Craftwell Страницы: 16

Бренд: Kreg Страницы: 132

Бренд: Renssi Страницы: 16

Бренд: Makita Страницы: 20

Бренд: Makita Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды