Clarke 6501661 Скачать руководство пользователя страница 4

4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

PERSONAL SAFETY

1. Stay alert, watch what you are doing and use common sense when 

operating a power tool. 

DO NOT

 use a power tool while you are tired or 

under the influence of drugs, alcohol or medication. A moment of 
inattention while operating power tools may result in personal injury.

2. Use personal protective equipment. 

ALWAYS 

wear eye protection. Safety 

equipment such as dust mask, non-skid safety shoes, hearing protection 
and a workshop apron capable of stopping small abrasive or workpiece 
fragments.

3.

AVOID

 accidental starting. Ensure the switch is in the off position before 

plugging in. Plugging in power tools that have the switch on invites 
accidents.

4. Remove any adjusting key or drift rod before turning the power tool on. A 

wrench or drift rod left attached to a rotating part of the power tool may 
result in personal injury.

5.

DO NOT 

overreach. Keep proper footing and balance at all times. This 

enables better control of the power tool in unexpected situations. 

6. Keep your hair and clothing away from moving parts. Loose clothes, 

jewellery or long hair can be caught in moving parts. 

7. Regularly clean the power tool’s air vents. The motor fan will draw dust 

inside the housing and accumulation of material could cause electrical 
hazards.

8.

AVOID

 operator fatigue. Stop the power tool at regular intervals for a short 

break to rest hands and arms.

9. Maintain your tools. Keep all handles and grips dry and clean.

10. If the machine requires repair, always contact your CLARKE dealer. Always 

insist on original spare parts. Repairs carried out by unauthorized persons 
may be dangerous and invalidate the guarantee.

11. This machine must only be used by adults. Children should not be allowed 

to play with this appliance.

POWER TOOL USE AND CARE

1.

DO NOT 

force the machine

.

 Use the correct power tool for your 

application. It will do a better and safer job at the rate for which it was 
designed.

2.

DO NOT

 use the power tool if the switch does not turn it on and off. Any 

power tool that cannot be controlled with the switch is dangerous and 
must be repaired.

Содержание 6501661





















Отзывы: