10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
1. Always rotate the workpiece by hand before turning on the motor and
check it does not strike the tool/tool rest.
2. Ensure the tool rest and tailstock are securely locked in position before
starting work.
3. Always position the tool-rest just above the centre-line of the lathe.
4. Press the green push-button (I) to
start the lathe and adjust the
speed using the speed control
knob.
NOTE:
Always use the lowest speed
when starting a new
workpiece, see Adjusting The
Belt Position on page 11.
5. The headstock spindle speed can
be monitored on the LED display
mounted on top of the
headstock.
6. Avoid turning timber which has
splits or substantial knots or voids
and take special care if these are
discovered.
7. When turning, always roughly turn
the work to a round form at slow
speed.
8. Take care that the turning tools do not bite suddenly into the workpiece.
Содержание 6501661
Страница 20: ......