24
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4. Depress the blade lock and slowly
rotate the retaining screw using
the hex key in clockwise direction.
• The blade lock engages after
no more than one rotation
•
WARNING: NEVER PUSH THE
BLADE LOCK IN WHEN THE
MOTOR IS RUNNING.
5. Remove the screw and outer
blade retaining disc.
6. Remove the blade from the shaft.
7. Carefully clean the retaining screw/outer and inner disc.
8. Fit the new saw blade in reverse order.
• Make sure that all parts are perfectly clean and the blade teeth
point down at the front.
• Every time that you change the saw blade, check to see that it spins
freely in the table insert in both perpendicular and 45° angle
settings.
9. Before continuing to work make sure that all guards are in good working
condition.
REPLACING THE TABLE INSERT
1. Remove screws at table insert. If
required, turn rotary table and
incline saw head to be able to
reach the screws.
2. Remove table insert.
3. Install new table insert.
4. Tighten the screws at table insert.
WARNING: IF THE TABLE INSERT IS DAMAGED THERE IS A RISK OF SMALL
PARTS GETTING STUCK BETWEEN TABLE INSERT AND BLADE, BLOCKING THE
BLADE. REPLACE A DAMAGED TABLE INSERT IMMEDIATELY.
