10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INSTALL THE WORK CLAMP
1. Loosen the thumb screw on the
clamp support.
2. Fit the clamp shaft into the clamp
support.
3. Fit the work clamp onto the
clamp shaft.
4. Tighten the thumb screw to
attach the work clamp.
5. Adjust the clamp as necessary.
INSTALL THE EXTENSION ARMS
1. Loosen the extension arm lock
bolt.
2. Move the extension arm into
position.
3. Tighten the extension arm lock
bolt.
DUST OUTLET
1. Put the dust bag onto the dust
outlet.
2. Make sure the zip on the dust bag
is closed.
3. You can also connect the dust
outlet to an extraction system.
• The dust outlet dimensions:
(Inner 35mm / Outer 45 mm).
USE A MITRE SAW STAND (
NOT SUPPLIED
)
You can also attach the mitre saw to
a mitre saw stand available from your
local Clarke supplier.
Содержание 6461518
Страница 28: ......
