7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9. ONLY use the saw blade supplied for cutting wood, never for the cutting of
metals.
10. ONLY use saw blades with diameters in accordance with the markings on
the saw.
11. Use additional workpiece supports, if required for workpiece stability.
12. Workpiece support extensions must always be secured and used during
work.
13. Replace table inserts when worn
14. Avoid overheating of the saw teeth.
15. When sawing plastic, avoid melting of the plastic.
16. Use the appropriate saw blades for this purpose. Replace damaged or
worn saw blades immediately.
17. When the saw blade overheats, stop the machine. Allow the saw blade to
cool down before using the machine again.
LASER SAFETY
1. DO NOT look directly into the laser beam with unprotected eyes.
2. NEVER look into the path of the beam.
3. NEVER point the laser beam towards reflecting surfaces and persons or
animals. Even a laser beam with a low output can cause damage to the
eyes.
4. NEVER open the laser module. Unexpected exposure to the beam can
occur.
5. The laser may not be replaced with a different type of laser.
6. Repairs of the laser may only be carried out by the laser manufacturer or
an authorised representative.
CAUTION: METHODS OTHER THAN THOSE SPECIFIED HERE CAN RESULT IN
DANGEROUS RADIATION EXPOSURE.
