16
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
PERFORMING A SLIDING CUT
The slide rail lets you cut larger workpieces up to 340 mm x 90 mm using an out-
down-back sliding motion.
1. Release the slide rail lock.
2. Push the trigger release (1) with
your thumb and squeeze the
trigger (2).
• Let the motor reach full speed.
3. Pull the saw head towards you (1).
4. Lower the saw blade (2) into the
workpiece.
5. Push the saw head back (3) to
complete the cut.
• Do not perform sliding cuts on
workpieces smaller than 50 x
100 mm.
• Lock the saw head in the rear
position when the sliding cuts
are complete.
