25
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2. Pull out the carbon brushes.
• If the carbon is worn to a length of 6 mm or less, or if the spring or
contact wire is burned or damaged, replace both brushes.
3. Replace the carbon brush cover, taking care not to cross thread it.
CLEANING
Your saw has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
• Keep the ventilation slots clear and regularly clean the motor
housing with a soft cloth.
• Regularly clean the table top.
• Regularly clean the dust collection bag.
• Avoid the use of cleaners or lubricants to maintain the tool. In
particular spray and aerosol cleaners may chemically attack the
plastic lower guard.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a
recycling centre and disposed of in a manner which is compatible
with the environment.
By purchasing this product, the customer is taking on the obligation to deal
with its safe disposal in accordance with the Waste Electrical and Electronic
Equipment (WEEE).
In effect, this means that this product must not be disposed of with general
household waste. It must be disposed of according to the laws governing
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal
facility. If disposing of this product or any damaged components, do not
dispose of with general waste. This product contains valuable raw materials.
Metal products should be taken to your local civic amenity site for recycling of
metal products.
