manualshive.com logo in svg

Clarke 6460072, Инструкция по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Clarke 6460072 Скачать руководство пользователя страница 4

4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

7. If the machine requires repair, always contact your CLARKE dealer. Always 

insist on original spare parts. Repairs carried out by unauthorized persons 
may be dangerous and invalidate the guarantee.

8. Before cleaning or maintenance operations, always unplug the machine 

from the power supply.

PERSONAL SAFETY

1. Stay alert, watch what you are doing and use common sense when 

operating a power tool. DO NOT use a power tool while you are tired or 
under the influence of drugs, alcohol or medication. A moment of 
inattention while operating power tools may result in personal injury.

2. Use personal protective equipment.

 

Always wear eye protection. Safety 

equipment such as dust mask, non-skid safety shoes, hearing protection 
and a workshop apron capable of stopping small abrasive or workpiece 
fragments.

3. Avoid accidental starting. Ensure the switch is in the off position before 

plugging in. Plugging in power tools that have the switch on invites 
accidents.

4. Remove any adjusting key or wrench before turning the power tool on. A 

wrench or a key left attached to a rotating part of the power tool may 
result in personal injury.

5. DO NOT overreach. Keep proper footing and balance at all times. This 

enables better control of the power tool in unexpected situations. Dress 
properly. Do not wear loose clothing or jewellery. 

6. Keep your hair, clothing and gloves away from moving parts. Loose 

clothes, jewellery or long hair can be caught in moving parts. Keep the 
work area clean and tidy.

7. Avoid operator fatigue. Stop the power tool at regular intervals for a short 

break to rest hands and arms.

8. Maintain your tools. Keep all working surfaces dry and clean.

POWER TOOL USE AND CARE

1. DO NOT force the machine. Use the correct power tool for your 

application. It will do a better and safer job at the rate for which it was 
designed.

2. DO NOT use the power tool if the switch does not turn it on and off. Any 

power tool that cannot be controlled with the switch is dangerous and 
must be repaired.

3. Disconnect the power tool from the power supply before making any 

adjustments, changing accessories, or storing the tool. These measures will 
reduce the risk of the power tool starting accidently.

Содержание 6460072

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды