Clarke 6267035 Скачать руководство пользователя страница 10

10

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

MODE:

1.

- Displays the battery voltage prior to pressing RUN, and displays the 

actual charging voltage during each of the charging cycles.

NOTE:

Due to the pulse voltages applied during the desulphation mode, the 
displayed voltage may constantly change and cycle from 0 volts to 16 
volts.

2.

A

 - Displays the current in Amps (A) being applied to the battery during 

charging.

NOTE:

If 0.0 is displayed, a very small current (A) is being applied to achieve 
maximum charge.

3. % 

- Displays the charge condition of the battery as a percentage of full 

charge.

TYPE:

1.

WET 

- Conventional automotive starting lead acid batteries generally have 

six cells, each containing lead plates and sulphuric acid. These batteries 
provide a high current output in short bursts and are ideally suited to 
automotive starting applications.

2.

CAL

 - Calcium batteries are essentially the same as lead acid batteries. 

However, the addition of small amount of calcium to the lead plates 
means calcium batteries have low water loss, low self discharge 
characteristics, lower internal resistance which provides a small increase in 
CCA performance and a higher charge rate acceptance compared to 
standard lead acid batteries.

3.

AGM

 - Absorbed Glass Mat batteries are a type of valve regulated lead 

acid battery designed to wick the battery electrolyte between the battery 
plates. AGM batteries contain only enough liquid to keep the mat wet with 
the electrolyte and if the battery is broken no free liquid is available to leak 
out. The advantages of this type is that the electrolyte does not need 
topping up, nor can it be. They can be operated in any position and they 
have a very low gas release during charging. these batteries are however, 
sensitive to overcharging and require a different charge algorithm than 
standard lead acid batteries.

4.

GEL

 - GEL batteries are a type of valve regulated lead acid battery and 

are typically more costly and do not offer the same power capacity as 
AGM batteries of a similar size. The GEL cell battery excels in slow discharge 
rates and higher ambient operating temperatures. GEL cell batteries must 
be recharged correctly or the battery will suffer premature failure.

Содержание 6267035

























Отзывы: