Clarke 6267019, Инструкция по эксплуатации и техническому обслуживанию

Страница: 9 / 20

9
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
THE CHARGING PROCESS
STEP 1: ANALYSING 1 : Checks if the battery has connected with the charger.
STEP 2: DESULPHATION : If battery voltage is too low, the program automatically
generates a pulsing current to remove sulphate.
STEP 3: SOFT START : Charges with gradually increasing charging current.
STEP 4: CONTROLLED CURRENT CHARGE : Adjusts the charging current intelligently.
STEP 5: ANALYSING 2 : Tests if the battery can absorb charge.
STEP 6: CONSTANT OUTPUT CHARGE : Charges with constant voltage and
compensates for any fake full charge caused by high current charging.
STEP 7: RECOVERY CYCLE CHARGE : Absorbs more charge and compensates for
the side effect of reduced charging current.
STEP 8: ABSORPTION : Charges with constant trickle current for maximum battery
voltage.
STEP 9: ANALYSING 3 : Tests if the battery can hold charge.
STEP 10: MAINTENANCE : Continuously monitors the battery, and charges with
trickle current once the voltage is lower than threshold.