14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CARE & MAINTENANCE
This battery charger requires minimal maintenance. As with any appliance or
tool, a few common sense rules will prolong its working life.
1. Wind up the leads when not in use. Examine the leads at regular intervals
for damage and have them replaced if necessary.
• Clean the case and leads if necessary with a moist cloth and clean any
corrosion from the clamps with a solution of water and baking soda.
ERROR MESSAGES
1. E01 D
ERROR LED
lit: Reverse connection
2. E02 D
ERROR LED
lit: Temperature in charger is too high
3. E03 D
ERROR LED
lit: The battery cannot store electric charge (dead
battery)
4. E04 D
ERROR LED
lit: No battery connected/battery voltage is lower
than 1 volt (dead battery)
5.
REPAIR-ON
dis
REPAIR LED
flashing: Charger automatically enters
repairing mode
6.
REPAIR-ON
dis
REPAIR LED
solid lit: Manually choose repairing
mode
WARNING: ALWAYS BE SURE THE CHARGER IS UNPLUGGED BEFORE
PERFORMING ANY MAINTENANCE OR CLEANING. ANY REPAIRS MUST BE
DONE BY A QUALIFIED CLARKE SERVICE TECHNICIAN.
Содержание 6267019
Страница 20: ......
