Clarke 6267019 Скачать руководство пользователя страница 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Battery Charger.

Before use, read this manual thoroughly and follow all instructions given.

1. The IBC80 is designed for charging all types of 12V & 24V lead-acid 

including WET (Flooded), MF (Maintenance-Free), EFB (Enhanced Flooded 
Battery), GEL, AGM (Absorbed Glass Mat) batteries.

2. A built-in intelligent microprocessor makes charging faster, easier and safer.

3. This charger has safety features, including protection for reverse polarity, 

short circuit, overheat and overcharge.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 
12 months from the date of purchase. Please keep your receipt as proof of 
purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the 
obligation to deal with the WEEE in accordance with the WEEE 
regulations in relation to the treatment, recycling & recovery and 
environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general 
household waste. It must be disposed of according to the laws governing 
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal 
facility.

Содержание 6267019





















Отзывы: