Clarke 6267019, Инструкция по эксплуатации и техническому обслуживанию

Страница: 13 / 20

13
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
charge before using this mode. This mode uses a high charging voltage
and may cause some water loss in WET cell batteries. Plus, some batteries
and electronics may be sensitive to high charging voltages. To minimise
risks, disconnect the battery from the vehicle before using this mode. To
stop repairing, press the
FUNCTION button again and REPAIR LED will go off
(digital display shows REPAIR-OFF ).
ALTERNATOR CHECK
Before the charger is connected with the battery which should be well
seated in the vehicle, press the
DISPLAY button until the ALTERNATOR%
LED is lit, start the vehicle and turn the vehicles headlights on. The
alternator percentage range is from 0% to 100%. Readings below 0% will
read
LO and readings above 100% will read HI . If you get a HI or LO
reading, have the electrical system checked by a qualified technician.
CHARGING TIME DURATION
Different battery capacity, residual voltage and charging current will all
affect charging time. The following table is for guidance in the case of a
fully discharged battery.
Battery
Size - Ah
Approx. Time to Charge
12V 24V
5A 10A 20A 5A 10A 20A
10 2.5h 1.5h 33mins 2.5h 1.5h 55mins
20 4h 2.5h 1.5h 4h 2.5h 1.5h
40 5h 5h 2.5h 5h 5h 2.5h
80 17h 9h 5h 17h 9h 5h
100 33h 17h 9h 33h 17h 9h
350 71h 36h 18.5h 71h 36h 18.5h