Clarke 3400035, Инструкция по эксплуатации и обслуживанию, Страница: 9 / 20

9
PREPARING FOR USE
When starting the engine for the first time, it is necessary to fill with oil and petrol.
To fill with oil, remove the oil filler cap and fill to the FULL mark on the dipstick, using
a good quality SAE30, 4 stroke oil (not supplied), available from your Clarke dealer.
Fill the fuel tank with regular grade LEAD FREE petrol. NEVER USE LEADED PETROL.
A. Oil
1. Get into the habit of checking the oil level before each use.
2. Add oil as necessary to keep the level to the FULL mark on the dipstick.
3. Use a good quality SAE 30 four stroke oil.
4. Change the oil after the first five hours operation (see Maintenance), and
thereafter every 25 working hours.
5. Always change the oil while the engine is warm - but not hot - never attempt
any maintenance on a hot engine.
To check the oil level, always clean around the dipstick before unscrewing it.
Once removed, wipe it with a clean cloth then replace, screwing down fully.
Remove once more and check the level.
B. Petrol
1. DO NOT fill the fuel tank when the engine is hot.
2. DO NOT fill the fuel tank whilst smoking.
3. DO NOT remove the filler cap whilst the engine is hot or running. ALWAYS allow
the engine to cool for at least 2 minutes before refuelling.
4. To avoid introducing dirt into the fuel system, wipe all grass and dirt from the
petrol filler cap before unscrewing it.
5. It is recommended that you fill the tank through a funnel with a filter.
6. Wipe away spillages before starting.
7. Use fresh petrol....stale fuel can cause the carburettor to gum up.
8. DO NOT refuel indoors or in an unventilated area.
9. DO NOT operate engine if petrol has been spilled. Move lawn mower well
away from the scene before starting.
IMPORTANT.
We strongly recommend the use of Briggs and Stratton Gasoline Additive, available
from your Clarke dealer.