Clarke 3400035, Инструкция по эксплуатации и обслуживанию, Страница: 10 / 20

10
1. Connect the spark plug lead.
2. If starting from cold, push primer bulb (Fig.8), firmly
three times. DO NOT push the primer bulb if the
engine is hot.
Note: Priming is usually unnecessary when restarting a
warm engine. However, cool weather may require
priming to be repeated.
2. Pull the 'DEAD MANS' handle to the main handle
STARTING & OPERATING
(Fig.9). this releases the brake.
3. Pull the recoil starter slowly
towards you (Fig.9A) until you
feel the full resistance. Return the
handle slowly then pull the
handle firmly towards you to its
full extent
4. After the engine has started, allow
to run for 30 seconds before
commencing to use.
To stop your lawn mower - release the 'DEAD MANS' handle
Model CLM420PR
does not incorporate a drive to its
wheels, the machine must therefore be pushed along
across the lawn.
MODEL CLM420SR
incorporates a Powerdrive,
operated by the lever shown in Fig.10.
To operate the Powerdrive, follow the above procedure
to start the machine, then, once started, gently pull the
Powerdrive lever towards the handle, thereby engaging
the drive.
Releasing the Powerdrive Lever stops the drive
automatically.
If the drive does not engage when the powerdrive lever
is pulled towards the handle, screw the adjuster
anticlockwise (Fig.11).
Screw adjuster in opposite direction if the powerdrive
does not disengage with the powerdrive lever free
(Fig.11).
To stop your lawn mower - release the Power drive lever,
then the 'Dead Mans' lever.