Clarke 3400035, Инструкция по эксплуатации и обслуживанию, Страница: 7 / 20

7
ASSEMBLY
Lower Handles
1. Insert lower handles into holes
provided in the body (Fig.2)
2. Push the handle firmly down until
the handle collars locate
securely into the holes in the
body (Fig.2A)...push home firmly.
Upper Handles
The upper handle should be fixed to the lower handle using
the kit provided (Fig.3).
Recoil Starter Pull Cord
With the spark plug lead
disconnected, pull the ‘Dead Mans’
lever to the handle to release the
brake on the engine, then gently pull
the starter ‘Pull Cord’ fully (Fig.4), and
locate it in the pull cord guide,
positioned on the handle (Fig.4A).
The Brake Cable and Drive Cable (Where fitted)
1. Insert cable connected to the
engine, into hole in the ‘Dead
Mans’ lever (Fig.5).
1a. Insert cable connected to the
rear axle, into hole in the
Powerdrive lever (CLM490SR)
2. Lock into position. (Fig.5A)
3. Attach the cable bracket to the handle using the locknut, bolt and washer
supplied.