Clarke 3400035, Инструкция по эксплуатации и обслуживанию, Страница: 13 / 20

13
Cleaning the Air Filter
At the end of every season, remove the
air filter, as follows:
Using a suitable screwdriver, remove the
single screw, securing the air filter
assembly to the carburettor - shown at
A, Fig. 14.
Remove the lid from the filter box and
withdraw the filter. Wash it thoroughly in
warm soapy water, rinse thoroughly and
allow to dry before reassembling in
reverse order.
Changing the oil
IMPORTANT:
Before changing the oil,
ensure the fuel tank is pumped dry.
Turn the mower on to its side, and remove
the drain plug (arrowed in Fig. 15), using
a 10mm square Key. Use gloves for this
operation, to prevent injury from the
cutting blade.
Turn the mower back on to its wheels,
allowing the oil to drain into a suitably
placed container. Removing the oil filler
will allow the oil to drain more freely.
When completely drained, replace the
Fig. 14
Fig. 15
drain plug and fill with Clarke SAE30 oil, to the ‘Max’ level on the dipstick.
Replace and secure the oil filler cap.
Replacing the blade
IMPORTANT:
Before replacing the
blade, ensure the fuel tank is
pumped dry.
Turn the mower on to its side, and
remove the single bolt, with washers,
securing the blade, using a good pair
of industrial gloves to prevent injury
from the blade.
Replace in reverse order ensuring the ‘O’ on the large flat washer faces towards
you.
Shown with blade removed
Underside of machine