Clarke 3110863, Инструкция по эксплуатации и техническому обслуживанию

Страница: 12 / 16

12
OPERATING INSTRUCTIONS
OPERATING THE TRIGGER SWITCH
To operate the trigger switch, proceed as follows.
1 Squeeze the trigger switch to start the drill.
2 Wait until the air drill is running at its maximum speed before applying it carefully to
the workpiece.
3 Release the trigger switch to stop the air drill.
DISCONNECTING THE AIR SUPPLY
WARNING! Do not disconnect the air supply hose until the compressor has been shut
down and the compressed air released.
1. Refer to the compressor instruction book for the procedures to shut down and
release the compressed air.
2. Once the pressure has been released, disconnect the air supply hose from the air
drill.
3. Store the air drill safely in its box in a dry, secure environment
Squeeze