background image

5

SAFETY PRECAUTIONS

IMPORTANT

FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN PERSONAL INJURY,

AND/OR DAMAGE TO PROPERTY.

WORK ENVIRONMENT

Keep the work area clean and tidy.

Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair out of
the way.

Keep children and visitors away - Do not let children handle the air drill. Make sure
that any other persons in the work area are dressed suitably and are wearing eye
and ear protectors.

Do not operate the air drill where there are flammable liquids or gases.

Keep the air supply hose away from heat, oil and sharp edges.

Do not fit the air drill to any stand or clamping device that may damage the tool.

USE

Stay alert and use common sense - Do not operate the air drill when you are tired
or under the influence of alcohol, drugs or medication.

Always wear eye protectors when using the air drill - Eye protectors must provide
protection from flying particles from the front and the side.

Always wear ear protectors when using the air drill.

Do not overreach - Keep proper footing and balance at all times.

Never use any type of bottled gas as a source of power for the air drill.

Do not connect the air supply hose with your finger on the trigger of the air drill.

Do not exceed the maximum pressure for the air drill: 90 psi / 6.2 bar.

Check hoses for leaks or worn condition before use, and ensure that all
connections are secure.

Check for the presence of live electric cables before use.

Do not use the air drill for any other purpose than that described in this book.

Do not carry out any alterations or modifications to the air drill.

Содержание 3110863

















Отзывы: