manualshive.com logo in svg

Clark S20 D, Руководство оператора

Поделиться
Скачать
Clark S20 D Скачать руководство пользователя страница 96

4-2

Before Operating the Truck

Before Operating the Truck

Be sure that you have read and
understood the information in this
Operator's Manual before operating
the lift truck.

The Operator's Manual Holder is
located on the back of the seat.

WARNING

!

•

This equipment can be dangerous if not used properly.
Safe operation is the responsibility of the operator. 

•

Do not start or operate the truck, or any of its functions
or attachments, from any place other than the
designated operator's position.

CAUTION

!

•

Inspect your lift truck before operating at the start of
the day or shift. Before putting your truck to use, check
the operation of the controls and all systems.

•

Protect yourself. Do not operate truck without a
driver's overhead guard. Do not remove overhead
guard unless specifically authorized. If operation
without this safety device is required, a risk
management system must be implemented and used
with great care.

Operator's Manual

Содержание S20 D











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды